BARR CM-20-6672 Chrysler Exhaust Elbow 20-degree
$145.00 $102.95 
BARCM-20-6672
BARR CM-20-6672 Chrysler Exhaust Elbow 20-degree, Replaces Chrysler part #3527794. Includes pipe plugs, RWC gasket and mounting bolts. 3-Year Limited Warranty, made in USA.
|
BARR CM-20-6674 Chrysler 6" Riser
$151.00 $104.95
BARCM-20-6674
BARR CM-20-6674 Chrysler 6" Riser, Replaces Chrysler
part #2846689. Includes all pipe plugs, RWC gasket and mounting bolts. 3-year limited warranty, made in USA.
|
BARR CM-20-2847405 Chrysler Elbow 90-degree
$156.00 $107.95
BARCM-20-2847405
BARR CM-2847405 Chrysler Elbow 90-degree, Replaces Chrysler part #'s 2469639 and #28447405. Includes all pipe plugs, RWC gasket and mounting bolts, 3-Year Limited Warranty, made in USA.
|
BARR CM-20-2600402 Chrysler Lower Swivel Elbow for LM318, 340 and 360
$180.00 $145.95
BARCM-20-2600402
BARR CM-20-2600402 Chrysler Lower Swivel Elbow for LM318, 340 and 360 cu.in. engines, use with upper swivel elbow CM-20-4142411. Supplied with RWC gasket and mounting bolts to manifold, 3-year limited warranty, made in USA.
|
Barr CM-1-6677-A Manifold Chrysler LM318, And 360 Log Style
$284.00 $233.95
BARCM-1-6677-A
Barr CM-1-6677-A Chrysler Exhaust Manifold LM318 & 360. MANIFOLD WILL FIT CHRYSLER ENGINES: 273, 318, 340 & 360 cu.in. FROM 1966 AND LATER MODELS. (Spark Plugs are located "BELOW" the exhaust manifold).
Manifold comes painted Chrysler Blue, along with Manifold to Head Gaskets and Standard Hex Head Steel Mounting Bolts.
If you prefer you can order optional Stainless Steel "Studs" and nuts order part #OSC826-SS. (6-required per-manifold), 3-year limited warranty, made in USA.
|
Chrysler Manifold Mounting Kit OSCO 826-MK-SS
$36.00 $25.95
OSC826-MK-SS
Chrysler Manifold Mounting Kit OSCO 826-MK-SS, use with OSCO 826 or BARR CM-1-6677-A Manifolds.
Includes OSC826-GH Gasket and Stainless Steel
Studs and Nuts.
|
Chrysler Manifold to Head Gasket OSCO 826-GH
$11.00 $7.95
OSC826-GH
Chrysler Manifold to Head Gasket OSCO 826-GH, fits LM318 & 360 motors, use with OSCO 826 or BARR CM-1-6677-A Manifolds.
|
Chrysler Stainless Steel Stud & Nut
$6.00 $3.95
OSC826-SS
OSCO 826-SS, Stainless Steel Stud and Nut to Mount OSCO 826 or BARR MC-1-6677-A Manifolds.
Sold Per Stud. 3-1/2" LONG (5/16-18 thread head side
with 5/16-24 thread for nut)
|
|
BARR CM-1-6672-H Front End Plate LM318-360 (drilled and tapped for water fitting)
$37.00 $28.95
BARCM-1-6672-H
BARR CM-1-6672-H Front End Plate LM318-360 (drilled and tapped for water fitting), Replacement Chrysler front end plate for OSCO 826 and BARR CM-1-6677-A Manifolds.
Plate is Drilled and tapped for 1/2" pipe to hose fitting.
|
|
BARR CM-1-6672-B Front End Plate LM318-360 without hose outlet
$38.00 $17.95
BARCM-1-6672-B
BARR CM-1-6672-B Front End Plate LM318-360 without hose outlet. Use with OSCO 826 or BARR CM-1-6677-A manifold, plate is not drilled and tapped for water fitting.
|
Chrysler Mounting Kit - OSC480-MK
$16.19 $11.19
OSC480-MK
End Plate/Riser/Elbow Mounting Kit for OSC826 Manifold.
Used on Raw Water Cooled Applications. Fits OSC0402,
OSC106, OSC106T, OSC689, OSC794 & OSC639.
|
Chrysler Mounting Kit - OSC480-MK-FW
$12.00 $8.95
OSC480-MK-FW
End Plate/Riser/Elbow Mounting Kit for OSC826 Manifold.
Used on Fresh Water Cooled Applications. Fits OSC0402,
OSC106, OSC106T, OSC689, OSC794 & OSC639.
|
Chrysler End Plate Gasket - OSC480
$6.00 $4.95
OSC480
End Plate/Riser/Elbow Gasket for OSC826 Manifold. Has Hole for
Water Inlet. Used on Raw Water Cooled Applications. Fits OSC794,
OSC0402, OSC639 & OSC689.
|
OSCO 480-FW Gasket Chrysler End Plate FWC
$10.00 $6.95
OSC480-FW
OSCO 480-FW Gasket Chrysler End Plate FWC. End Plate, Riser, or Elbow Gasket for OSC826 Manifold. No Holes.
Used on Fresh Water Cooled Applications. Fits OSC0402,
OSC794, OSC689 & OSC639.
|
BARR CM-1-6672-E Copper Water Distribution Tube for LM318/360 Manifold
$45.00 $26.95
BARCM-1-6672-E
BARR CM-1-6672-E Copper Water Distribution Tube for LM318/360 Manifold, BARR # CM-1-6677-A or OSCO # 826 Manifold.
|
|
7081 Chrysler "440" V-8 Manifold
$400.00 $279.95
OSC7081
OSCO 7081 Chrysler "440" V-8 Manifold, Replacement for Chrysler part # E7081M.
This manifold fits big block Chrysler V8's
after 1959, including 361, 383, 400, 413, 426,
and 440 cid. engines (except 413 "E" with
staggered bolt pattern). Includes all pipe plugs. Quality fit with a 3-year limited warranty.
|
|
|
Chrysler Mounting Kit - OSC7081-MK
$26.00 $18.95
OSC7081-MK
Chrysler Mounting Kit - OSC7081-MK Manifold to Block Mounting Kit for OSC7081 Manifold.
Includes OSC7081-GH Gasket and Bolts.
|
|
|
Chrysler Manifold Gasket - OSC7081-GH
$15.00 $9.95
OSC7081-GH
Chrysler Manifold Gasket - OSC7081-GH Manifold to Block Gasket for OSC7081 Manifold.
|
|
|
OSCO 424 Chrysler 440 Copper Water Distribution Tube
$78.00 $54.95
OSC424
OSCO 424 Chrysler 440 Copper Water Distribution Tube, for OSCO 7081 Manifold used on 440 engines.
Limited Inventory
This item is currently limited in availability(ONE ONLY on hand), we apologize for any inconvenience; please do not exceed this amount when ordering. When more inventory is available, this message will be updated.
|
|
BARR CM-20-4142411 Chrysler Swivel Elbow Upper
$313.00 $179.95
BARCM-20-4142411
BARR CM-20-4142411 Chrysler Swivel Elbow Upper. Replacement Swivel Elbow for Chrysler
part #'s 3745639, 2847623, 2847404, and
E9223M. use with lower elbow CM-20-2600402 for LM318/360 or lower elbow CM-20-9234 for 440 engines. Includes all pipe plugs.
3-Year limited warranty, made in USA.
|
BARR CM-20-9234 Chrysler Lower Elbow for 440 cu.in.
$175.00 $141.95
BARCM-20-9234
BARR CM-20-9234 Chrysler Lower Elbow for Chrysler 383 and 440 cu.in. engines. Replaces
Chrysler part #E923M. Fits OSCO 7081 or BARR CM-1-5972-A Manifolds.
Includes pipe plugs and elbow to manifold gasket and mounting bolts. 3-Year limited warranty, made in USA.
|
Osco 4-EXT Chrysler 4" High Extension
$141.00 $98.95
OSC4-EXT
Osco 4-EXT Chrysler 4" High Extension. Replacement 4"-High Extension for Chrysler 318, 360 and 440 Engines. Made in USA, 3-Year Limited Warranty.
|
Barr CM-20-9232 Chrysler Exhaust Riser 6"-High Extension
$147.00 $89.95
BARCM-20-9232
Barr CM-20-9232 Chrysler Exhaust 6"-High Extension. Chrysler 361, 383, 400, 413, 426, and 440 ci.in. Made in USA, 3-year Limited warranty. NOTE: 6"-High.
|
BARR CM-20-4142411PKG SWIVEL MOUNTING KIT
$37.65 $31.15
BARCM-20-4142411PKG
BARR CM-20-4142411PKG SWIVEL MOUNTING KIT, Kits consists of 1-sleeve, 1-small and 1-large o'ring, 4-bolts and 4-retainers, use to mount swivel elbow # CM-20-4142411.
|
OSCO 7087-OR Chrysler O'Ring Set
$25.00 $19.99
OSC7087-OR
OSCO 7087-OR Chrysler O'ring Set. O'ring Kit (1-large,1-small) for OSC4-EXT or OSC5639.
|
OSCO 7087 Chrysler Sleeve CM-20-9224
$21.00 $14.95
OSC7087
OSCO 7087 Chrysler Sleeve CM-20-9224, replaces Barr CM-20-9224. Replacement Stainless Steel Exhaust Sleeve for OSC5639 and other swivel riser parts.
Replaces Chrysler #3527087 and #E9224M.
|
OSCO 150 Chrysler Front End Plate 440 cu. in.
$40.00 $27.95
OSC150
OSCO 150 Chrysler Front End Plate 440 cu. in. Replacement front end plate for OSCO 7081 Manifold.
|
Chrysler Mounting Kit - OSC121-MK
$13.00 $8.95
OSC121-MK
End Plate/Elbow Mounting Kit For OSC7081 Manifolds. Fits OSC150
End Plate and OSC9234 Lower Elbow. Includes OSC121
Gasket and bolts.
|
Chrysler End Plate Gasket - OSC121
$8.00 $5.95
OSC121
End Plate Gasket for OSC7081 Manifold. Fits OSC150 End Plate
and OSC9234 Lower Elbow.
|
CHRYSLER 3619673-K ADAPTER PLATE 440 CHRYSLER W/ GASKETS
$0.00
3619673-K
Chrysler 440 Cu.In. Manifold Adaptor 3619673-K with gaskets. Use only with orginal equipment Chrysler "OEM" Manifolds, allows lower elbow CM-20-9234 to mount up to Original Equipment Chrysler Manifold, note-this part is not needed if using OSCO #7081 or Barr # CM-1-5972-A Replacement manifolds. (Call for current pricing).
|
CHRYSLER 4417063 LM 318 & 360 LATE STYLE CENTER RISER MANIFOLD
$450.00 $332.95
BAR4417063
CHRYSLER 4417063 LM 318 & 360 LATE STYLE CENTER RISER MANIFOLD, Fits Chrysler LM318 & 360 cu.in. late style engines that required center riser style exhaust. Supplied with manifold to head gasket and mounting bolts, 3-year limited warranty, made in USA.
|
|
53-4005 Chrysler Center Riser LM318 & 360 Engines
$128.00 $103.95
BARIND53-4005
BARR 53-4005 Chrysler Center Riser 3" Exhaust oulet. (NOTE: The Original Chrysler Riser is No Longer Available). This Replacement Riser will fit original
Equipment Chrysler Manifold. This New Style Riser is 1" Taller and 5" Longer than Original Riser. When
Replacing Original Chrylser Riser with this new style riser You need to Order: Mounting Kit # BAR53-4002. 3-year limited warranty, made in USA.
|
|
Barr 53-4002 Chrysler Center Riser Adaptor Kit
$64.00 $51.95
BAR53-4002
Barr 53-4002 Chrysler Center Riser Adaptor Kit, use when installing IND53-4005 "NEW" style center riser on Chrysler manifold # 4417063. Includes all gaskets for RWC applications.
|
53-4007 Chrysler Adaptor Mount Kit - RWC
$9.95
IND53-4007
RWC Adaptor Gasket and Hardware Kit for Mounting IND53-4005 new style center riser to
Exhuast Manifold # 4417063 For Raw Water Cooled applications. Kit is for (1) Riser.
|
53-4006 Chrysler Adaptor Mount Kit - FWC
$11.95
IND53-4006
FWC Adaptor Gasket and Hardware Kit for Mounting IND53-4005 new style center riser to
Exhuast Manifold # 4417063 For Fresh Water Cooled applications. Kit is for (1) Riser.
|
OSCO 826 Chrysler LM-318 and 360 V-8 Exhaust Manifold
$320.00 $223.95
OSC826
OSCO 826 Chrysler LM-318 and 360 V-8 Exhaust Manifold. Replacement for Chrysler part #'s 3675826
and 2469556. All small block
Chrysler V8's after 1965, including 273, 318,
340 and 360 cid. engines from 175 HP to 260
HP. Includes all pipe plugs. Quality fit with a 3-year limited warranty.
Replaces BARR CM-1-6677-A, painted with black primer, for mounting kit order optional part number OSC826-MK-SS.
Out of stock
This item is currently out of stock, we apologize for any inconvenience; please do not order at this time. When this item becomes available this message will be updated.
|
Chrysler Exhaust Manifolds and Risers
