MERCURY, MARINER and FORCE OUTBOARD POWER TILT & TRIM MOTORS AND PUMPS

MERCURY, MARINER and FORCE OUTBOARD POWER TILT & TRIM MOTORS AND PUMPS

Arco 6217 MOTOR and RESERVOIR ONLY
~~$232.00~~ $192.95

ARC6217
Arco 6217 MOTOR and RESERVOIR ONLY. Fits: Early (Before 1983) Mercruiser Sterndrives, early Mercury/Mariner Outboards w/trim pump mounted inside the boat and some early Volvo Penta Sterndrives. This unit is a replacement for the Prestolite units, which had a round trim motor using a rectangular trim pump body. You must re-use your "hydraulic valve body" (part were hoses attach), the "hydraulic valve body" is not available separately.

ARCO 6270 Mercury and Mariner Outboards Tilt and Trim Motor and Reservoir Assembly
~~$496.00~~ $413.95

ARC6270
ARCO 6270 Mercury and Mariner Outboards Tilt and Trim Motor and Reservoir Assembly. Includes valve body, Fits Mercury and Mariner 225 thru 275-hp Outboards, NOTE: trim pump assembly with Square Style trim motor and Round Metal Oil Reservoir is mounted inside the boat. Replaces Mercury #'s 823653A5 , 92459A4, 92459A3, 92459A4, 92459A8, 818161A1, 818161A2, 823653A9, 846859A4. For electrical motor only order ARC6218.

18-6273-1 Mercury/Mariner outboard tilt/trim pump
~~$518.00~~ $413.95

18-6273-1
High Performance Cartridge Pump and Motor assembly. Replaces Mercury Marine Part Numbers 99186, 99186-1, 99186-T. Fits 35-220 hp (1985-1993) Mercury/Mariner Outboards w/Design I, 3-Ram, 3-Wire Tilt/Trim units w/side fill reservoir, Integral Trim/Tilt Systems.Note: Mercury Marine does not supply this part, Mercury Marine superceeds this part to a complete "TRIM KIT" part #826729A4 ($1000.00) (Similar to Arco 6278 below), The difference between this Sierra 18-6273-1 and the Arco 6278, you must install two relays and a wire harness supplied. (installation instructions are also supplied)

API PT470N Trim Motor and Pump Assembly 12-V (3-Wire)
~~$502.00~~ $426.95

APIPT470N
API PT470N Trim Motor and Pump Assembly 12-V (3-Wire). Replaces Mercury #'s 99186, and 99186T. Fits Mercury and Mariner 35-225 HP Outboard, 1985-1992 With Design 1, 3-Ram Side Fill Integral Trim & Tilt System.

API PT471NMK Trim Motor Only 12-Volt (3-Wire)
~~$288.00~~ $244.95

APIPT471NMK
API PT471NMK Trim Motor Only 12-Volt (3-Wire). Fits Mercury and Mariner 35-225 HP Outboard, 1985-1992 With Design 1, 3-Ram Side Fill Integral Trim & Tilt System.

API PT475TN-4 Trim Motor and Pump Assembly 12-V (2-Wire) with Relays and Wire Harness
~~$527.00~~ $448.95

APIPT475TN-4
API PT475TN-4 Trim Motor and Pump Assembly 12-V (2-Wire) with Relays and Wire Harness. New 2-Wire Trim Motor and Pump assembly, includes Relays, Wire Harness and mounting bolts. Fits Mercury and Mariner 35-225 HP Outboard, 1985-1992 With Design 1, 3-Ram Side Fill Integral Trim & Tilt System. Replaces Merc #'s 99186, 99186-1, and 99186T. Replaces both round Prestolite and square Eaton trim motor and pump assembly.
*Click Photo For More Information*

Quantity

API PT476NMK-3 Trim Motor Motor Only 12-Volt (2-Wire) with Relays and Wire Harness
~~$324.00~~ $275.95

APIPT476NMK-3
API PT476NMK-3 Trim Motor Motor Only 12-Volt (2-Wire) with Relays and Wire Harness. Mounting Flange adapts to the Original Mercury Pump. Includes O-Ring, Coupler, Relays, Wire Harness & Mounting Hardware. This Is A Replacement Motor Kit For Mercury 99186T, obsolete square Eaton trim motor. Fits Mercury and Mariner 35-225 HP Outboard, 1985-1992 With Design 1, 3-Ram Side Fill Integral Trim & Tilt System.
*Click Photo For More Information*

Quantity

Arco 6278 Trim Pump/Motor, Merc OB.
~~$572.00~~ $475.95

ARC6278
Arco 6278 Trim Pump/Motor, Merc OB. High Performance Cartridge Pump and Motor assembly. Replaces Mercury Marine Part Numbers 99186, 99186-1, 99186-T. Fits 35-220 hp (1985-1993) Mercury/Mariner Outboards w/Design I, 3-Ram, 3-Wire Tilt/Trim units w/side fill reservoir, Integral Trim/Tilt Systems. Note: Mercury Marine does not supply this part, Mercury Marine superceeds this part to a complete "TRIM KIT" part #826729A4 ($1000.00) ARC6278 USES A 2 BOLT MOUNT W/DESIGN-I, 3-RAM, 3-WIRE UNIT. WILL WORK ONLY WITH THE SIDE FILL RESERVOIR, NOT WITH THE BACK FILL TYPE. **Click Image For A Photo**

ARCO 6250 TRIM MOTOR ONLY (2-WIRE) MERCURY OUTBOARDS
~~$219.00~~ $181.95

ARC6250
ARCO 6250 TRIM MOTOR ONLY (2-WIRE) MERCURY OUTBOARDS. POWER TRIM MOTOR FOR MERCURY OUTBOARDS. FITS LATE MODEL MERCURY 135, 150 XR6, MAGNUM III, 175, 200, 250 HP, 105-140 HP JET. 2-WIRE CONNECTION; 2-BOLT MOUNTING INCLUDES O-RING. FLAT BLADE SHAFT WITH BULLET CONNECTOR TERMINAL ENDS. REPLACEs MERCURY PART #'s 828708, 878265A1 and 878265A4. Also replaces API PT486NM and MES T1082M. NOTE: THIS MOTOR WILL NOT REPLACE AN EARLY MODEL MERCURY CARTRIDGE PUMP MOTOR, THAT WOULD REQUIRE THE ARC6278.

18-6775 Trim/Tilt Motor Mercury Outboards
~~$425.00~~ $339.95

18-6775
Trim/Tilt Motor for Mercury/Mariner and Force Outboards. Replaces Mercury part # 811673-1. For 3-wire, single ram systems. Fits 75-hp and 90-hp, 3-cylinder outboards. and 100, 115, 125-hp, 4-cylinder outboards. Same as ARCO 6274.

ARCO 6276 Trim Motor and Reservoir for Single Ram, 2-Wire Systems
~~$295.00~~ $244.95

ARC6276
ARCO 6276 Trim Motor and Reservoir for Single Ram, 2-Wire Systems. 40 to 125-hp,4-bolt mount (same as Sierra 18-6777). Mercury Marine does not offer this part for sale, Mercury requires owner to replace complete Trim Assembly $800.00 plus. Replaces many Mercury, Mariner and Force outboard part #'s 818903A1, 819762A4, 819479A1, 819480A1, 822870A1, 832021A1, 855654A1, 19217A1, 854472A2. Supplied with o-ring, coupler and mounting hardware. "Click the picture or name for additional drawings of various trim motors replaced by this part number".

ARCO 6279 POWER TRIM MOTOR ONLY (3-WIRE) MERCURY OUTBOARDS
~~$242.00~~ $200.95

ARC6279
ARCO 6279 POWER TRIM MOTOR ONLY (3-WIRE) MERCURY OUTBOARDS. FITS MERCURY & MARINER OUTBOARDS With DESIGN-II, 3-RAM, 3-WIRE TRIM MOTOR, HOLLOW HEX SHAFT W/ AFT FILL RESERVOIR, REPLACES MERCURY #811628.

*NOTE: "Please click the name or image to see a line drawing for your application".

18-6757 SIERRA TILT/TRIM MOTOR
~~$340.00~~ $271.95

18-6757
NEW SIERRA TILT/TRIM MOTOR, FITS MERCURY 35 TO 220-HP (1985-1992) WITH DESIGN-1, 3-RAM SIDE FILL INTEGRAL TRIM/TILT SYSTEM W/SQUARE STYLE EATON MOTOR.

API PT116N-3 Force & Chrysler Trim Motor (2-Wire)
~~$265.00~~ $226.95

APIPT116N-3
API PT116N-3 Trim and Tilt Motor w/Reservoir, 2-wire motor, Replaces Chrysler and Force Outboard part #'s 820545 and F694541-1. Replaces Sierra # 18-6279. Note: does not include valve body.

Arco 6216 Trim Motor (3-Wire)
~~$272.00~~ $226.95

ARC6216
Arco 6216 Trim Motor 3-Wire, Fits Chrysler, O.M.C. (Motor/Reservoir Only)

ARCO 6218 Trim Motor ONLY Mercruiser and Mercury Outboards
~~$185.00~~ $152.95

ARC6218
ARCO 6218 Trim Motor ONLY Mercruiser and Mercury Outboards. Replaces electric "MOTOR" only on all Mercruiser Sterndrive Oildyne Trim pumps with white plastic oil reservoir. (1983 to present), replaces trim motor only on MEST1088M-OE, SDE9C108, MEST1088M-SK and 865380A25. Replaces Mercury and Mercruiser part #'s, 17649, 17649A1, 17649A02, 87828, 891736T. Brand new 12-volt motor, 3-wire, 1-year limited warranty.

API PT498NM Mercury 827675A1 Trim Motor
~~$207.00~~ $176.95

API PT498NM Replaces Mercury 827675A1 Trim Motor, also replaces ARCO 6255 and MES T1074M. Fits late model 25 thru 50 hp Mercury and Mariner Outboard engines. 2-wire connection.

order toll free: 1-800-382-9335
local: (631)-722-5700
Marineengineparts.com & Partman.com are wholly owned subsidiaries of Lighthouse Marine Supply & Lighthouse Marine Distributors, Inc
Partman & Partman.com are both registered trademarks of lighthouse Marine Distributors, Inc., Not responsible for typographical errors. Some merchandise may be limited in supply or available only by special order. Pictures are for illustrations purposes only, Prices are subject to change without notice.
29 Edgar Avenue - Riverhead, NY 11901 - toll free: 800-382-9335 - p: 631-722-5700 - fax: 631-722-5719 or Email: sales@partman.com