 |
|
MERCRUISER GM (Chevy) 4 Cylinder 2.5 & 3.0-Liter MANIFOLDS & RISERS
|
MERCRUISER 55538A2 DIRECT REPLACEMENT RISER by BARR
$170.00 $134.95 
BARMC-20-55538
MERCRUISER 55538A2 DIRECT REPLACEMENT RISER by BARR # MC-20-55538, FOR 4-CYLinder 120-hp and some older 150 and 155-hp, 6-cylinder in-line Mercruiser engines, Includes raw water gasket and mounting hardware. Replaces Mercruiser part #'s 39920A1 and 55538A2. Also replaces AquaPower 5702, Sierra 18-1973. This is the smaller square gasket pattern riser (2-1/2" x 3" bolt centers), fits manifold MC-1-63122.
3-year limited warranty, made in USA. Riser is drilled and tapped for throttle cable attachment.
THE PIPE PLUGS IN THIS RISER HAVE BEEN INSERTED WITH A PERMANENT SEALER.IF YOUR APPLICATION REQUIRES
A HOSE BARB INSERTED INTO THE RISER, PLEASE SELECT AN ALTERNATIVE PRODUCT.
|
63122A1 Mercruiser MANIFOLD -120HP (2.5-Liter) EARLY MODELS
$371.00 $278.95
BARMC-1-63122
BARR MC-1-63122 direct replacement Mercruiser exhaust manifold for the early style 2.5-Liter 120-hp inline 4-cylinder GM (Chevy). Replaces Mercuiser part #'s 63122A1 and 63122A10. Used with direct replacement riser MC-20-55538, (ORDER SEPARATELY). Riser mounting flange with smaller square bolt pattern (2-1/2" x 3" bolt centers),
made in USA, 3-year limited warranty.
|
Barr MC-20-76351 DIRECT REPLACEMENT RISER
$170.00 $130.95
BARMC-20-76351
BARR MC-20-76351 REPLACES MERCRUISER B-60426A1 & B-76351A1, RISER HAS SQUARE BOLT PATTERN TO MANIFOLD. Includes raw water gaskets and all mounting hardware.(without internal sleeve)For riser mounting flange with square bolt pattern (2-13/16" x 3-1/16" bolt centers).THE PIPE PLUGS IN THIS RISER HAVE BEEN INSERTED WITH A PERMANENT SEALER.IF YOUR APPLICATION REQUIRES
A HOSE BARB INSERTED INTO THE RISER, PLEASE SELECT AN ALTERNATIVE PRODUCT.
|
Barr MC-20-76325 DIRECT REPLACEMENT RISER (LOW-PROFILE)
$211.00 $143.95
BARMC-20-76325
BARR MC-20-76325 DIRECT REPLACEMENT (Low Profile) RISER, Replaces Mercruiser part # 76325A2. Fits 4-Cylinder, 120R/140R, 2.5/3.0-Liter and some early MC-470's. (Riser uses 4-bolts for mounting to manifold). Includes raw water gaskets and mounting hardware. For mounting flange with square bolt pattern (2-13/16" x3-1/16" bolt centers), made in USA, 3-year limited warranty.
|
Barr MC-20-12076 Replacement 2.5 and 3.0-Liter Mercruiser "U" SHAPED OFF-SET Riser
$210.00 $143.95
BARMC-20-12076
Barr MC-20-12076 Replacement 2.5 and 3.0-Liter Mercruiser "U" SHAPED OFF-SET Riser. (Riser uses only 2-bolts for mounting to manifold). Replaces Mercruiser part #'s 12076A1 & 12076A2. Also Replaces OSCO part # 2076. Fits 2.5 & 3.0-Liter engines. Riser mounting flange with square bolt pattern (2-13/16" x 3-1/16" bolt centers). Complete with mounting bolts and gasket. Made in USA, 3-year limited warranty.
|
BARR 12076A2 RISER KIT with mounting gasket, bolts and Rubber Exhaust Bellows
$244.00 $153.95
KITBARMC-20-12076
BARR 12076A2 RISER KIT with mounting gasket, bolts and Rubber Exhaust Bellows. Replaces OSCO # 2076A2 and Mercruiser # 12076A2. USE THIS KIT WHEN REPLACING "OFF SET" ADAPTER (WHICH IS NO LONGER AVAILABLE). Kit Includes raw water gasket, mounting hardware and exhaust hose. For mounting flange with square bolt pattern (2-13/16" x 3-1/16" bolt centers).
|
52390A1 Mercruiser 4- CYL. 181 CU. IN. 140 HP MODEL 140
$329.00 $242.95
BARMC-1-52390
BARR MC-1-52390 direct replacement water manifold replaces Mercruiser part # 52390A1. For engine serial number 3332138 and up. Contains choke stove tube. Riser mounting flange with square bolt pattern (2-13/16" x 3-1/16" bolt centers), made in USA, 3-year limited warranty.
Out of stock
This item is currently out of stock, we apologize for any inconvenience; please do not order at this time. When this item becomes available this message will be updated.
|
95862A9 MANIFOLD MERCRUISER -2.5 and 3.0-Liter 4-CYLINDER GM (CHEVY) With ROCHESTER CARB.
$325.00 $263.95
BARMC-1-95862
BARR MC-1-95862 direct replacement manifold with the Rochester Carburetor, {2 idle air adjustment screws}, (Carb bolt pattern 3-1/4" x 1-7/8"). Manifold uses 6-bolt mounting pattern to cylinder head, WITHOUT a choke stove built into manifold casting. Direct replacement for Mercruiser part # 95862A9. Riser mounting flange with square bolt pattern(2-13/16" x 3-1/16" bolt centers). Made in USA, 3-year limited warranty. Replaces Sierra # 18-1954-1. Includes manifold to head gasket and mounting hardware.
|
96705A1 Mercruiser MANIFOLD GM (CHEVY) 4-CYLINDER 120R & 140R-MR Engines
$325.00 $263.95
BARMC-1-96705
BARR MC-1-96705 direct replacement manifold using the Rochester carburetor, (Carb bolt pattern 3-1/4" x 1-7/8"). Manifold uses 6 bolts to cylinder head, manifold has choke stove built into manifold casting. Direct replacement for Mercruiser part #96705A1. Riser mounting flange with square bolt pattern (2-13/16" x 3-1/16" bolt centers), made in USA, 3-year limited warranty, includes manifold to head gasket and mounting hardware.
|
Mercuiser 860235A04 MANIFOLD 4-CYLINDER GM (CHEVY) 120R & 140R using MERCARB (1983-1989)
$325.00 $251.95
BARMC-1-99798
BARR MC-1-99798 DIRECT REPLACEMENT FOR MERCRUISER 4-cyl engines using "MERCARB". (single idle air adjustment screw),
(carb bolt pattern 3-11/16" x 2"). 6-bolt mounting pattern to head. Direct replacement for Mercuiser part #860235A04. Riser mounting flange with square bolt pattern (2-13/16" x 3-1/16" bolt centers), Made by BARR in USA, 3-year limited warranty.
|
Mercruiser 860235A03 Manifold GM (CHEVY) 4-cyl 3.0-Liter with MERCARB (1990 & Newer)
$384.99
MER860235A03
Mercruiser 860235A03 Manifold GM (CHEVY) 4-cylinder, 3.0-Liter Engines 1990 and Newer using "MERCARB" (carb bolt pattern 3-11/16" x 2"), {Single idle air adjusting screw}. Includes: gaskets, pipe plugs, fuel line, mounting hardware and Instructions.
Riser mounting flange is square bolt pattern (2-13/16" x 3-1/16" bolt centers),
Original Equipment made by Mercury Marine in USA, 1-year limited warranty.
Replaces older Mercury part #'s 806867A3, A9, A12 and 815560A5, A7.
|
18-4398 Mercruiser Manifold Gasket Kit- GM 140/3.0L
$20.00 $15.95
18-4398
Complete Manifold Gasket Kit for GM 140/3.0L replaces oe#27-53354a1.us for engine serial#3332137-6229717(without siamese port cylinder)For riser mounting flange with square bolt pattern(2 13/16"x3 1/16" bolt centers)
|
Barr Marine MC-1-0000 Adapter Plate Kit
$136.00 $110.95
BARMC-1-0000
Barr Marine MC-1-0000 Adapter Plate Kit. Converts large intake port 181 CU. Manifolds to the new 3.0 Liter high output small intake port cylinder heads. Includes plate gaskets, and hardware for Mercruiser manifolds.
|
order toll free: 1-800-382-9335
local: (631)-722-5700
Marineengineparts.com & Partman.com are wholly owned subsidiaries of Lighthouse Marine Supply & Lighthouse Marine Distributors, Inc
Partman & Partman.com are both registered trademarks of lighthouse Marine Distributors, Inc., Not responsible for typographical errors. Some merchandise may be limited in supply or available only by special order. Pictures are for illustrations purposes only, Prices are subject to change without notice.
29 Edgar Avenue - Riverhead, NY 11901 - toll free: 800-382-9335 - p: 631-722-5700 - fax: 631-722-5719 or Email: sales@partman.com
|
