|
Barr CR-20-98068 Crusader Replacement 3" Exhaust Elbow 98068
$163.00 $129.95 
BARCR-20-98068
Barr CR-20-98068 Crusader Replacement 3" Exhaust Elbow for 3" ID exhaust hose, replaces Crusader part # 98068. Gasket and Mounting Bolts in photo are included. Primed and Painted Crusader Blue. Note: 3-Year Limited Warranty. Caution: Installer must clean primer/paint from all gasket-mating surfaces prior to installation.
|
|
BARR CR-20-97924 Crusader Replacement 4" Exhaust Elbow 97924
$163.00 $121.95
BARCR-20-97924
BARR CR-20-97924 Crusader Replacement 4" Exhaust Elbow 97924. For 4" ID exhaust hose, replaces Crusader part # 97924. Gasket and Mounting Bolts in photo are included. Primed and Painted Crusader Blue. Note: 3-Year Limited Warranty. Caution: Installer must clean primer/paint from all gasket-mating surfaces prior to installation.
|
|
Barr CR-20-97772 Crusader Replacement 4" High Riser Extension 97772
$147.00 $111.95
BARCR-20-97772
Barr CR-20-97772 Replacement Crusader 4" High Riser Extension. Replaces Crusader part # 97772. Gaskets Included. Primed and Painted Crusader Blue. Note: 3-Year Limited Warranty. Caution: Installer must clean primer/paint from all gasket-mating surfaces prior to installation. NOTE: OVERALL HEIGHT OF THIS RISER IS 9".
|
|
|
Barr CR-20-97169 Crusader Replacement 8" Riser Extension 97169
$165.00 $122.95
BARCR-20-97169
Barr CR-20-97169 Replacement Crusader 8" Riser Extension, Replaces Crusader part # 97169, Gaskets Are Included. Primed and Painted Crusader Blue. Note: 3-Year Limited Warranty. Caution: Installer must clean primer/paint from all gasket-mating surfaces prior to installation. NOTE: OVERALL HEIGHT OF THIS RISER IS 13".
|
|
BARR CR-20-97386 Crusader Replacement 4" Upper Swivel Elbow 97386
$160.00 $119.95
BARCR-20-97386
BARR CR-20-97386 Crusader Replacement 4" Upper Swivel Elbow 97386. Primed and Painted Crusader Blue. Use with either CR-20-97387 =(3") or CR-20-97624 =(4") lower elbow. Note: 3-Year Limited Warranty.
|
BARR CR-20-97387 Crusader Replacement 3" Lower Swivel Elbow 97387
$80.00 $59.95
BARCR-20-97387
BARR CR-20-97387 Crusader Replacement 3" Lower Swivel Elbow 97387. Use with CR-20-97386 upper swivel elbow for applications with 3"-ID exhaust hose. Primed and Painted Crusader Blue. Note: 3-Year Limited Warranty.
|
BARR CR-20-97624 Crusader Replacement 4" Lower Swivel Elbow 97624
$80.00 $59.95
BARCR-20-97624
BARR CR-20-97624 Crusader Replacement 4" Lower Swivel Elbow 97624. Use with CR-20-97386 upper swivel elbow for applications with 4"-ID exhaust hose. Primed and Painted Crusader Blue. Note: 3-Year Limited Warranty.
|
|
Barr CR-1-97752 Crusader Replacement Starboard Manifold 97752 GM (Chevy) Small Block V-8
$276.00 $223.95
BARCR-1-97752
Barr CR-1-97752 Crusader Replacement for Crusader Starboard Manifold part # 97752. Fits GM (Chevy) V-8 Engines Small Block Engines 283, 305, 307, 327, And 350 Cu.In. 5.0 and 5.7-Liter. For Starboard Side Manifold. When replacing older style
manifolds with "bolt on" water inlet fitting, you will need
part #OSC7854 water inlet fitting. Primed and Painted Crusader Blue. Note: Gaskets and mounting hardware in photo are included. Note: 3-Year Limited Warranty. Caution: Installer must clean primer/paint from all gasket-mating surfaces prior to installation.
|
|
|
Barr CR-1-97753 Crusader Replacement Port Manifold 97753 GM (Chevy) Small Block V-8
$276.00 $223.95
BARCR-1-97753
Barr CR-1-97753 Replacement for Crusader Port Side Manifold part # 97753. Fits GM (Chevy), V-8 engines, small block engines 283, 305, 307, 327, And 350 Cu.in., 5.0 and 5.7-Liter. When replacing older style
manifolds with "bolt on" water inlet fitting, you will need
part #OSC7854 water inlet fitting.
For Portside Manifold. Primed and Painted Crusader Blue. Note: Gaskets and mounting hardware in photo are included. Note: 3-Year Limited Warranty. Caution: Installer must clean primer/paint from all gasket-mating surfaces prior to installation.
|
|
|
Barr CR-1-97992 Crusader Replacement Starboard Manifold 97992 GM (Chevy) Big Block V-8
$297.00 $239.95
BARCR-1-97992
Barr CR-1-97992 Crusader Replacement Starboard Manifold, replaces Crusader part # 97992. Fits Crusader GM (Chevy) V-8 engines, Big Block 454 and 502 Cu.In., 7.4-Liter and 8.2-Liter. Starboard Manifold.When replacing older style
manifolds with "bolt on" water inlet fitting, you will need
part #OSC7854 water inlet fitting.
Primed and Painted Crusader Blue. Note: Gaskets and mounting hardware in photo are included. Note: 3-Year Limited Warranty. Caution: Installer must clean primer/paint from all gasket-mating surfaces prior to installation.
|
|
|
Barr CR-1-97993 Crusader Replacement Port Manifold 97993 GM (Chevy) Big Block V-8
$297.00 $239.95
BARCR-1-97993
Barr CR-1-97993 Crusader replacement Port Manifold, replaces Crusader part # 97993. Fits Crusader GM (Chevy) V-8 engines, Big Block 454 and 502 Cu.In., 7.4-Liter and 8.2-Liter. Port Manifold. Primed and Painted Crusader Blue. When replacing older style
manifolds with "bolt on" water inlet fitting, you will need
part #OSC7854 water inlet fitting.
Note: Gaskets and mounting hardware in photo are included. Note: 3-Year Limited Warranty. Caution: Installer must clean primer/paint from all gasket-mating surfaces prior to installation.
|
|
OSCO 7924 Crusader Replacement 4" Exhaust Elbow 97924
$180.00 $119.95
OSC7924
OSCO 7924 Crusader Replacement 4" Exhaust Elbow 97924. Note this is for 4"-ID exhaust hose. Includes all pipe
plugs. Replaces Crusader Part # 97924.
3-Year Limited Warranty. Painted with Primer Only.
|
OSCO 7386 Crusader Replacement Upper Swivel Elbow 97386
$170.00 $118.95
OSC7386
OSCO 7386 Crusader Replacement Upper Swivel Elbow 97386. Replaces Crusader Upper Swivel Elbow.
3-Year Limited Warranty. Painted with Primer Only.
|
Crusader 12 Point Bolts-Part No.OSC20257
$3.00 $2.95
OSC20257
12 Point Bolt used to Secure Exhuast Elbow
to Manifold or Riser. Sold Per Bolt.
|
|
Crusader Mounting Kit-Part No. OSC7772-MK
$50.00 $34.95
OSC7772-MK
Fits #OSC7772 riser. Includes #OSC6108 gasket, mounting studs,brass locknuts and copper washers.
|
|
|
Crusader Mounting Kit-Part No. OSC7169-MK
$53.00 $37.95
OSC7169-MK
Fits #OSC7169 riser. Includes #OSC6108 gasket, mounting studs,brass locknuts and copper washers.
|
|
Crusader Nut and Washer Kit-Part No. OSCNWK
$15.00 $10.95
OSCNWK
This kit includes (4)brass locknuts and (4)copper washers for attaching
studs on all Crusader log style manifolds. Note: These should be replaced every
time they are removed to ensure proper sealing.
|
Barr 96562 Crusader Gasket (1-Slott)
$2.50 $2.45
BAR96562
Barr 96562 Crusader Gasket (1-Slott). Used to sandwich between stainless steel block off plate and between exhuast riser and elbow. Also replaces OSCO 6562. To see correct gasket application Click here
|
Barr 96108 Crusader Gasket (3-Slot)
$2.00 $1.95
BAR96108
Barr 96108 Crusader Gasket (3-Slot). Used only in front of spacer block on FWC models or between manifold and riser on RWC models. Also replaces OSCO 6108. To see correct gasket application Click here
|
97296 Crusader Water Block Off Plate-Part
$5.85 $5.85
CRU97296
Stainless Steel block off plate. Sandwich between (2)CR47-C-96562 gaskets when
blocking off Fresh water side from Raw water side of Exhuast system. To see correct gasket application Click here
|
OSCO 7387 Crusader Lower Swivel Lower 3" Exhaust Elbow 97387
$84.00 $58.95
OSC7387
OSCO 7387 Crusader Lower Swivel Lower 3" Exhaust Elbow 97387. Use with upper swivel elbow # OSC7386 for applications with 3"-ID exhaust hose. Replaces Crusader 97387. 3-Year Limited Warranty. painted with primer only.
|
OSCO 7624 Crusader Replacement Lower Swivel Lower 4" Exhaust Elbow 97624
$85.00 $59.95
OSC7624
OSCO 7624 Crusader Replacement Lower Swivel Lower 4" Exhaust Elbow 97624. Use with upper swivel elbow # OSC7386 for applications with 4"-ID exhaust hose. Replaces Crusader 97624. 3-Year Limited Warranty. painted with primer only.
|
Crusader 22221 HOSE 4" ID X 3-1/2" LONG
$13.55 $13.55
CRU22221
Crusader 22221 HOSE 4" ID X 3-1/2" LONG. Exhaust Hose 4"-ID X 3-1/2"-Long, Used between upper elbow # OSC3786 and lower elbow(s) # OSC7387 OR OSC7624. HOSE CLAMPS NOT INCLUDED.
|
CRUSADER 97295 Crusader Water Spacer Block
$76.05 $76.05
CRU97295
CRUSADER 97295 Crusader Water Spacer Block, This Water Outlet Adaptor is used on
Fresh Water Cooled Engines. Use (1)OSC6108
Gasket Between Manifold and Adaptor and
OSC7296 Block Off Plate Between (2)OSC6562
Gaskets When Joining Adaptor to Riser/Elbow.
|
Crusader Water Fitiing 1" Pipe x 1-1/4" hose
$19.00 $12.95
OSC7854
Crusader Water Fitiing 1" Pipe x 1-1/4" hose, 90-degree water fitting for Crusader Small block and Big block Manifold part #'s OSC7752, 7753, 7992, 7993. When replacing older style manifolds with hose fitting held on with a bolt, you will need to use this pipe to hose fitting because new manifolds have a threaded inlet and outlet.
|
Crusader Water Fitting-Part No. MID32-024
$8.00 $5.95
MID32-024
3/4" MPT x 1" ID hose, straight. Replaces Crusader #97911.
|
727003 Crusader Water Fitting-Part No. OSCF68C9
$8.95
OSCF68C9
Brass Water Elbow, 3/4" MPT x 1" ID hose, 90 degree elbow. Replaces Crusader #727003.
|
Moeller 025491 Crusader Engine Blue Spray Paint
$12.50 $9.95
MOE25491
Moeller 025491 Crusader Engine Blue Spray Paint, color matched to orginal equipment Crusader Blue spray paint, replaces Crusader # 20859 and Tempo Spray Paint # 6991.
|
Crusader 20859 Crusader Blue Spray Paint
$19.35 $19.35
CRU20859
Crusader 20859 Orginal Equipment Spray Paint, Crusader BLUE.
|
CW-GH Manifold Gasket-BB Chevy
$13.00 $8.95
OSCCW-GH
Manifold to Block Gasket for all Big Block Chevy Motors.
|
OSCO 8068 Crusader Replacement 3" Exhaust Elbow 98068
$170.00 $118.95
OSC8068
OSCO 8068 Crusader Replacement 3" Exhaust Elbow 98068. Replaces Crusader 3" Exhaust Elbow. Includes all pipe
plugs. Replaces Crusader part #'s 98068, 96560, etc. Quality fit with a 3-year limited warranty. Painted with Primer Only.
|
|
OSCO 7772 Crusader Replacement 4" High Exhaust Riser 97772
$190.00 $132.95
OSC7772
OSCO 7772 Crusader Replacement 4" High Exhaust Riser 97772. Replaces Crusader 4" Exhaust Riser # 97772. Includes all pipe
plugs. Quality fit with a 3-year limited warranty. Painted with primer only. NOTE: OVERALL HEIGHT OF THIS RISER IS 9".
|
|
|
OSCO 7169 Crusader Replacement 8" High Exhaust Riser 97169
$192.00 $134.95
OSC7169
OSCO 7169 Crusader Replacement 8" High Exhaust Riser 97169. OSCO Replaces Crusader 8" Exhaust Elbow part # 97169. Includes all pipe
plugs. Quality fit with a 3-year limited warranty. Painted with primer only. NOTE: OVERALL HEIGHT OF THIS RISER IS 13".
|
|
|
Crusader 97752 Manifold Small Block GM (Chevy) STARBOARD
$280.00 $195.95
OSC7752
OSCO 7752 replaces Crusader Small Block Manifold-Starboard Side.
Replaces Crusader Part #'s
97752 & 96120. Quality fit with a 3-year limited warranty. When replacing older style
manifolds with "bolt on" water inlet fitting, you will need
part #OSC7854 water inlet fitting. New manifolds have a threaded water inlet fitting, not a "bolt on" style like older style.Out of stock
This item is currently out of stock, we apologize for any inconvenience; please do not order at this time. When this item becomes available this message will be updated.
|
|
|
Crusader 97753 Manifold Small Block GM (Chevy) PORT
$280.00 $195.95
OSC7753
OSCO 7753 replaces Crusader Small Block V-8 Manifold-Port Side.
Replaces Crusader Part #'s
97753 & 96121. Quality fit with a 3-year limited warranty. When replacing older style
manifolds with "bolt on" water inlet fitting, you will need
part #OSC7854 water inlet fitting. New manifolds have a threaded water inlet fitting, not a "bolt on" style like older style.
Out of stock
This item is currently out of stock, we apologize for any inconvenience; please do not order at this time. When this item becomes available this message will be updated.
|
|
|
Crusader Mounting Kit-Part No. OSC775-MK
$19.00 $13.95
OSC775-MK
Used on Manifold #OSC7752 and #OSC7753, without alternator bracket
mounted to manifold. Includes manifold to head gasket and mounting bolts.
|
|
|
|
Crusader Mounting Kit-Part No. OSC775-MK-A
$19.00 $13.95
OSC775-MK-A
Used on manifolds #OSC7752 and #OSC7753 with alternator bracket
mounted to manifold. Includes manifold to head gasket and mounting bolts
|
|
|
OSCO 7992 Crusader Big Block GM 7.4-Liter V-8 Manifold-STARBOARD SIDE
$300.00 $209.95
OSC7992
OSCO 7992 Crusader Big Block Manifold-Starboard side
Replaces Crusader #'s 97992 & 97114. Includes
all pipe plugs. Quality fit with a 3-year limited warranty. When replacing older style
manifolds with "bolt on" water inlet fitting, you will need
part #OSC7854 water inlet fitting. New manifolds have a threaded water inlet fitting, not a "bolt on" style like older style.
|
|
|
OSCO 7993 Crusader Big Block 7.4-Liter V-8 Manifold-PORT SIDE
$305.00 $213.95
OSC7993
OSCO 7993 Crusader Big Block manifold-PORT SIDE
Replaces Crusader part#'s 97993 & 97115.
Includes all pipe plugs. Quality fit with a 3-year limited warranty. When replacing older style
manifolds with "bolt on" water inlet fitting, you will need
part #OSC7854 water inlet fitting. New manifolds have a threaded water inlet fitting, not a "bolt on" style like older style
|
|
|
Crusader Mounting Kit-Part No. OSC799-MK
$20.00 $13.95
OSC799-MK
Fits #'s OSC7992 and OSC7993. manifolds above. Includes manifold to head
gasket and mounting bolts.
|
|
